Free shipping on orders over $50

Floriani Stitch N Wash Fusible – 15″ x 10 yds

Sale!
SKU: 9949

Floriani Stitch N Wash Fusible – 15″ x 10 yds

Price: $24.94

Stitch N Wash Tearaway Embroidery Stabilizer is a 1.5 oz tear away stabilizer that is ideal for airy, open work type embroidery designs on light cottons and linen.

Floriani Part Number: FSWF1510

Our huge selection at low warehouse prices!
Don’t buy until you get the Warehouse price!

Quantity
+

Lowest Price Promise

Because of manufacturer set pricing, Sewing & Vacuum Warehouse offers a low price promise to all of our customers!

Outside of Texas?

You may qualify for no taxes on your purchase!

Description

Floriani Stitch N Wash Fusible Tearaway Embroidery Stabilizer is a 1.5 oz tear away stabilizer that is ideal for airy, open work type embroidery designs on light cottons and linen. It is unique because it is made up of half soluble and half non-soluble fibers. By wetting the design once it is complete the stabilizer is easily torn away without distorting stitches or harming the delicate fibers of heirloom quality fabrics. The design will retain the non-soluble part of the stabilizer throughout the life of the garment keeping the embroidery looking smooth. Any remnants of Stitch N Wash Tearaway Embroidery Stabilizer around the design will wash out in the laundry. This product is now available in 8-1/2″ x 11″ sheets for feeding through a printer for paper/foundation-piecing designs and templates.

Try the new version of Stitch N Wash when doing embroidery on loosely woven versions of the fabrics mentioned above that tend to shift during the hooping and embroidery process. By fusing the Stitch N Wash Fusible on to the back of the fabric, it will aid in keeping the fabric taut. This version also eliminates the need for basting or messy spray adhesives.

Product Features:

  • Easy to remove from around delicate embroidery or machine stitching
  • Won’t shadow through light colored fabrics
  • Eliminates countless hours of “picking” out stabilizer remnants
  • Super stable and will support about 8,000 stitches if the design is well-digitized

How to Use:

  • Hoop one layer of the stabilizer within the frame with
    the garment or fabric. Be sure to use a piece at least
    one inch larger than the outer parameter of the
    embroidery frame.
  • Embroider desired design.
  • Remove the hoop from the machine and garment.
  • Wet around the edge of the design using a sponge,
    foam paint brush or envelope sealer. Wait about
    10 seconds to allow the water to activate the water
    soluble portion of the stabilizer.
  • Tear away as much of the Stitch N Wash as possible.
  • Stabilizer remnants will wash out in the laundry with
    a mild detergent and agitation.
  • Fuse one layer of the stabilizer on to the back of
    the garment. Be sure to use a piece at least one inch larger
    than the outer parameter of the hoop to insure proper stabilization.
  • *Important – Use a low temp (260°, silk) setting on
    your iron. Do not touch the surface of your iron to the Stitch N Wash,
    press from the fabric side or use a press cloth (muslin or cotton)
  • Hoop the garment and stabilizer. Try to achieve
    “tight as a drum” tension.
  • Repeat steps 2 – 6 from above.

Please Note: If the design to be stitched is denser than 8,000 stitches or if it is a poorly digitized design (too many stitches for designs size), float an additional layer of Floriani Medium Tearaway between the hoop and the bed of the machine for each additional 8,000 stitches for added support!

Additional information

Brand