Description
Floriani Power Mesh Fusible is a 1.5 oz sheer cutaway embroidery stabilizer available in black, white and beige. Unlike traditional cutaway, Floriani Power Mesh Fusible will not shadow through on light colored fabrics such as knits. Its softness makes it ideal for children’s clothing and baby garments. The uniqueness of the fusible version makes this product a staple in your embroidery stabilizers. There is no need for basting or messy spray adhesives which leave a residue on the needle and machine when using this product. By fusing the stabilizer to the back of the garment, we are more successful in hooping and do not stretch the garment out of shape. No Show embroidery stabilizer is attached to the entire area where the embroidery will be stitched unlike spray adhesives which only “spot” tack and allow shifting of the fabric. This product is also available in a non-fusible version.
Use this powerful yet sheer cutaway when embroidering on light colored knits or stretch fabrics to prevent “show through” of the stabilizer. Floriani Power Mesh is very soft, making it ideal for children’s clothing, golf shirts, or light T-shirts. Other uses for this unique cutaway include: Use in conjunction with our RNK Heat Craft Tool to create free standing embroideries, patches, emblems, and appliques – Use as the foundation for “in the hoop” block building, zippered bags, quilting and more!
Product Features:
- Lightweight stabilizer
- Can be fused to your fabric before you sew
- Easy to use – just iron on!
- Doesn’t show through fabrics
- Ideal for knits and light cotton fabrics
- Soft feel against the skin
- Ideal for children’s clothing and baby garments
- Available in a non-fusible version
How to Use:
- Cut a piece of the stabilizer at least one inch larger
than the hoop size you are planning to use. - Hoop the stabilizer to the back of the garment.
- Place the embroidery frame on to the machine.
- Complete the layout and centering of the design.
- After the design is complete, remove the garment
from the machine and embroidery hoop. Trim the
stabilizer as close to the design as possible.
Please Note: Will support around six to eight thousand stitches on an average size, well-digitized embroidery design (4″ x 4″). Important! If the design is denser than 6,000 stitches or if it is a poorly digitized design (too many stitchesfor designs size),”float” one layer of Floriani Medium Tearaway between the hoop and the bed of the machine for each additional 8,000 stitches for added support! After the design is complete the tear away can be removed leaving just the soft mesh against the skin.